Callsign sprint
Copy 50 Morse callsigns that speed up as you get them right and slow down when you miss. RufzXP style, in your browser. How fast can you go?
- Callsign
- –
- Speed
- 20 WPM
- Score
- 0
- Best
- –
50 callsigns, each sent once. Type it and press Enter. Right speeds up the next one, wrong slows it down. Hearing one again halves its points.
Start at
Sound
How to use
Choose a start speed: 15, 20, 25 or 30 WPM. Pick one a little under what you copy with ease.
Press Start the sprint. The first callsign plays once.
Type it in the box and press Enter. If you didn't catch it, press Hear it again first, for half the points.
Read the result: the points and speed for a right answer, or the right callsign with your mistakes marked. Press Enter for the next one.
After 50 callsigns, read your total, how many you got right and your top speed. Press Go again to beat it.
What it does
It trains the one skill every contest and DX operator needs: copying a whole callsign, heard once, at speed.
50 callsigns a run. Each is sent once, built like a real amateur callsign from around the world.
A speed that follows you. Each right answer makes the next callsign faster; each miss makes it slower.
Points for speed and length. Long callsigns at high speed score most.
Mistakes shown. A miss shows the right callsign, with your copy marked letter by letter.
A record of the run. Every callsign appears in a strip below, crossed out if you missed it, with its speed on hover.
Your best and your progress. The best score is kept on this device, and each letter feeds your learning progress and the daily review.
How it works
Each of the 50 callsigns is sent once at the current speed. After a right callsign the speed goes up 4%; after a miss it goes down 8%.
It never drops below 10 WPM or rises above 60. Because a miss costs twice what a hit gains, the speed settles where you copy about two callsigns in three.
Timing follows the PARIS standard: one unit lasts 1,200 ms divided by the WPM. A dot is one unit and a dash three, with one unit inside a letter and three between letters. At 20 WPM a dot is 60 ms; at 40 WPM it is 30 ms.
Points are the callsign's length times the speed, rounded to the nearest ten, and halved if you heard it again. Tone and Volume under the sprint are shared with the other drills; the sprint sets its own speed.
Examples
How the speed climbs from 20 WPM with no misses:
| Point in the run | Speed | Dot |
|---|---|---|
| Start | 20.0 WPM | 60 ms |
| After 5 right | 24.3 WPM | 49 ms |
| After 10 right | 29.6 WPM | 41 ms |
| After 15 right | 36.0 WPM | 33 ms |
| After 20 right | 43.8 WPM | 27 ms |
| After 25 right | 53.4 WPM | 22 ms |
One miss at 30 WPM drops you to 27.6 WPM, and three in a row to about 23.4.
Points for a few callsigns of the kind the sprint sends:
| Callsign | Morse | Speed | Points | Heard again |
|---|---|---|---|---|
| W5E | .-- ..... . | 40 WPM | 120 | 60 |
| K1ABC | -.- .---- .- -... -.-. | 20 WPM | 100 | 50 |
| DL4XY | -.. .-.. ....- -..- -.-- | 30 WPM | 150 | 75 |
| VK2XYZ | ...- -.- ..--- -..- -.-- --.. | 25 WPM | 150 | 75 |
Tips for a higher score
Hear it again sparingly. It halves the points, but beats a miss that slows you down.
Start a bit low. The speed climbs fast: start 5 WPM below your comfortable speed.
Copy in your head. Type after the whole callsign, not letter by letter as it plays.
Beat your best. Your best score is kept on this device.
Trust and limits
Private by design.
Honest about limits.
On your device
Runs in your browser
The tones are made on your device, and your scores and progress are saved on this device only.Know the limits
Not RufzXP
It follows the idea of RufzXP but is not RufzXP, and its scores are not comparable with RufzXP results. The callsigns are invented.Who keeps it
Who keeps it
Maintained by Translate Morse Code, an independent site; last updated November 2026.
Good questions
Frequently asked questions.
About the callsign sprint
What is RufzXP?
A classic callsign-copying trainer for radio amateurs: 50 callsigns, with the speed rising after each right answer and falling after a miss. Its scores are used in high-speed telegraphy contests. This sprint follows the same idea in your browser, with nothing to install.
How is the score worked out?
Each callsign copied right scores its number of characters times the speed in WPM, rounded to the nearest ten. K1ABC at 20 WPM is 5 × 20 = 100 points.
Hearing it again halves that. Misses score nothing and slow the next callsign down.
What speed should I start at?
A little under the speed you copy comfortably. The sprint speeds up by 4% after each right callsign, so a run of ten takes 20 WPM to almost 30. Choose 15, 20, 25 or 30 WPM to start.
What happens when I miss a callsign?
It scores nothing, the next callsign comes 8% slower, and the result shows the right callsign with your copy marked letter by letter. A miss costs twice what a right answer gains, so the speed settles where you get most of them right.
Are the callsigns real?
They are made up but built like real ones: a prefix such as K, W, VE, G, DL, JA, VK or HB9, a call-area digit (HB9 already has its own), then one to three letters. Any match with a real station is chance.
How fast can the sprint go?
Up to 60 WPM, and never below 10. At 60 WPM a dot lasts 20 ms, by the PARIS standard of 1,200 ms divided by the WPM. Few people copy callsigns that fast, but the top of the scale leaves room.
Does the sprint count toward my daily review?
Yes. Every letter you copy, right or wrong, is recorded in your learning progress on this device. Letters you miss come back in the daily review.