Morse code WPM calculator
Pick a speed in words per minute and see how long every dot, dash and gap lasts, the characters a minute, and Farnsworth timing for a slower overall speed. Then hear it. Free, no sign-up.
Dot length = 1,200 ÷ 18 WPM = 66.7 ms
- Dot
- 66.7 ms
- Characters a minute
- 90
- One PARIS with its gap
- 3.33 s
- Words a minute
- 18 WPM
Timing at 18 WPM
| Element | Units | Time |
|---|---|---|
| Dot | 1 | 66.7 ms |
| Dash | 3 | 200 ms |
| Gap inside a letter | 1 | 66.7 ms |
| Gap between letters | 3 | 200 ms |
| Gap between words | 7 | 467 ms |
Why PARIS is 50 units
- P .--. 11
- gap 3
- A .- 5
- gap 3
- R .-. 7
- gap 3
- I .. 3
- gap 3
- S ... 5
- word gap 7
50 units × 66.7 ms = 3.33 s, so 18 of them fill a minute.
How to work out Morse code timing
Set Speed to the words per minute you want to know about.
Read the dot length, characters a minute and one PARIS, with the formula worked out.
Check the timing table for every dot, dash and gap at that speed, in units and milliseconds.
Switch on Farnsworth and set an overall speed to see how much the gaps stretch while the characters stay fast.
Press Hear PARIS to listen to the speed you set.
What it does
A speed setting is a promise about time. The calculator shows what it promises, element by element.
Every element in milliseconds. Dot, dash, the gap inside a letter and the gaps between letters and words, from 5 to 40 WPM.
The formula, worked. Dot length is 1,200 ÷ WPM, shown with your numbers, beside characters a minute and how long one PARIS takes.
Farnsworth timing. Set a character speed and a slower overall speed, and see each gap before and after it stretches.
Hear it. PARIS three times at the timing on screen, played by the same sound engine as every player on the site.
How it works
Morse timing is counted in units. Under ITU-R M.1677-1, a dot is one unit and a dash three; the gap inside a letter is one unit, the gap between letters three and the gap between words seven. The guide to the gaps between letters and words covers how to write them.
Speed is counted on PARIS, the speed word. PARIS is .--. .- .-. .. ..., 50 units with the gap after it, so N words a minute is 50 × N units a minute. One unit lasts 60,000 ÷ (50 × N) = 1,200 ÷ N milliseconds: 66.7 ms at 18 WPM, the speed the site plays at.
Farnsworth timing follows the ARRL standard (Jon Bloom, KE3Z, QEX 1990). The dots and dashes keep the character speed, and the extra time the slower overall speed needs is shared between the letter and word gaps, 3 to 7, until one PARIS takes 60 ÷ overall speed seconds.
Morse code timing at common speeds
Standard spacing, no Farnsworth. A dash and the gap between letters are the same length.
| Speed | Dot | Dash and letter gap | Word gap | Characters a minute | One PARIS |
|---|---|---|---|---|---|
| 5 WPM | 240 ms | 720 ms | 1,680 ms | 25 | 12 s |
| 10 WPM | 120 ms | 360 ms | 840 ms | 50 | 6 s |
| 13 WPM | 92.3 ms | 277 ms | 646 ms | 65 | 4.62 s |
| 15 WPM | 80 ms | 240 ms | 560 ms | 75 | 4 s |
| 18 WPM (the site) | 66.7 ms | 200 ms | 467 ms | 90 | 3.33 s |
| 20 WPM | 60 ms | 180 ms | 420 ms | 100 | 3 s |
| 25 WPM | 48 ms | 144 ms | 336 ms | 125 | 2.4 s |
| 30 WPM | 40 ms | 120 ms | 280 ms | 150 | 2 s |
| 35 WPM | 34.3 ms | 103 ms | 240 ms | 175 | 1.71 s |
| 40 WPM | 30 ms | 90 ms | 210 ms | 200 | 1.5 s |
With Farnsworth, characters at 18 WPM spaced for 13 WPM keep a 66.7 ms dot, but the gap between letters grows from 200 ms to 402 ms and the gap between words from 467 ms to 939 ms. One PARIS then takes 4.62 s, which is 13 WPM overall.
Typical Morse code speeds
There is no official average. These are the levels with a published source.
| Speed | Where it comes from | Source |
|---|---|---|
| 5 WPM | The US Novice and Technician license code test; from April 15, 2000 to February 23, 2007, the one code test left, for General and Amateur Extra | ARRL; Federal Register, 2000 and 2007 |
| 13 WPM | The US General and Advanced class code test until April 15, 2000 | ARRL |
| 20 WPM | The US Amateur Extra class code test until April 15, 2000 | ARRL |
| 20 to 30 WPM | Where experienced operators converse easily | ARRL |
| Over 40 WPM | Skilled operators copying in their heads | Wikipedia |
To see where you stand, find your own speed with the speed test. At 18 WPM one PARIS takes 3.33 s.
After the numbers
Once you know what a speed means, the next step is to practice at that speed, stepping up as your copy holds. If you are still learning, the gaps can do the slowing for you: the Farnsworth timing trainer keeps each character fast and closes the gaps over time.
Good questions
Frequently asked questions.
About Morse code speed
What is the average WPM for Morse code?
There is no official average, but there are well-known levels. US amateur license tests asked for 5 WPM (Novice and Technician), 13 WPM (General) and 20 WPM (Amateur Extra) until April 15, 2000. The ARRL says experienced operators converse easily at 20 to 30 WPM. Skilled operators can copy over 40 WPM in their heads.
The site plays everything at 18 WPM. To find your own speed, take the speed test.
What are the rules for spacing in Morse code?
A dot is one unit and a dash three. The gap inside a letter is one unit, between letters three and between words seven. At 18 WPM that is 66.7 ms, 200 ms and 467 ms for the three gaps.
The guide to the gaps between letters and words shows how to write them, with slashes for word breaks.
How is Morse code speed in WPM calculated?
Speed counts the word PARIS. With the gap after it, PARIS is 50 units, so N words a minute is 50 × N units a minute and one unit lasts 1,200 ÷ N milliseconds.
At 18 WPM a dot is 66.7 ms and one PARIS with its gap takes 3.33 s. PARIS, the speed word has its own page with its sound.
How many characters per minute is 20 WPM?
100 characters a minute. PARIS has five letters, so characters a minute is five times the WPM, and the FCC also counts a word as five characters. At 18 WPM it is 90.
What is the difference between PARIS and CODEX?
They are the two standard words. PARIS (50 units with its gap) stands for plain-language text; CODEX (60 units) stands for five-letter code groups, which run longer.
At 20 WPM a unit is 60 ms by PARIS but 50 ms by CODEX. This calculator, the site's players and most trainers use PARIS.
What is Farnsworth timing?
Letters sent at a high character speed with longer gaps between them, so the overall speed is lower. The ARRL standard (Jon Bloom, KE3Z, 1990) shares the extra time between letter and word gaps, 3 to 7.
With characters at 18 WPM spaced for 13, a dot stays 66.7 ms, but a letter gap grows from 200 ms to 402 ms and one PARIS takes 4.62 s instead of 3.33 s. The drills start at 18 WPM spaced for 12; Farnsworth timing has a trainer of its own.
How long is a dot at 20 WPM?
60 ms: 1,200 ÷ 20. A dash and the gap between letters are 180 ms, the gap between words 420 ms, and twenty PARIS with their gaps fill exactly one minute.
Do you still need Morse code for a ham radio license?
Not in the United States. The FCC dropped the last code test, 5 WPM for the General and Amateur Extra classes, on February 23, 2007. Many operators still learn it for the CW part of the bands.
Trust and limits
Private by design.
Honest about limits.
On your device
No account, nothing sent
The calculator and the sample run in your browser with no sign-up, and nothing you set leaves your device.Know the limits
What it covers
International Morse by the PARIS standard, 5 to 40 WPM. CODEX timing and American Morse are explained, not calculated.ITU-R M.1677-1
Tested against the standard
Units follow ITU-R M.1677-1 and Farnsworth gaps the ARRL standard, and every time on this page is made by the same code that plays the sound. Written by Aman Singh for Translate Morse Code, an independent site; last updated November 2026.
Sources
- ITURecommendation ITU-R M.1677-1: International Morse codeThe standard · Used for the dot, dash and gap units
- ARRLA Standard for Morse Timing Using the Farnsworth Technique (Jon Bloom, KE3Z, QEX, April 1990)PDFUsed for the Farnsworth gaps
- Morse Code WorldMorse Code Timing (Stephen C. Phillips)Used for PARIS as 50 units and the dot length formula
- WikipediaMorse code: speed in words per minute and operator proficiencyUsed for CODEX, the FCC's five-character word and copying over 40 WPM
- ARRLLearning Morse CodeUsed for the old license speeds and conversation speeds
- Federal RegisterAmateur Service Rules, 65 FR 6548 (FCC 99-412, February 10, 2000)PDFUsed for one 5 WPM code test from April 15, 2000
- Federal RegisterAmateur Service Rules, 72 FR 3081 (FCC 06-178, January 24, 2007)PDFUsed for the code test removed on February 23, 2007
Last checked November 2026