Skip to main content

Farnsworth Morse code trainer

Hear Morse characters at full speed with longer gaps between them, type what you copy and see every letter scored. Close the gaps as you improve. Free, no sign-up.

translatemorsecode.com/tools/farnsworth-morse-code-trainer/Live

Speed is how fast each character is sent. Farnsworth is the overall speed: lower it and the gaps between characters and words grow.

Show the code

Copy by ear; the code shows once you check.

Press Play to start a round.

Groups right
0
Letters right
–
Round
0 of 10

Timing at 18 WPM, Farnsworth 12 WPM

One unit = 1,200 ÷ 18 = 66.7 ms

Added delay per word = (60 × 18 − 37.2 × 12) ÷ (12 × 18) = 2.933 s

Gap between letters = 3 × 2.933 ÷ 19 = 463 ms; between words = 7 × 2.933 ÷ 19 = 1,081 ms

Dot, dash and gap lengths at 18 WPM, standard and with Farnsworth spacing
PartStandard, 18 WPMFarnsworth 12 WPM
Dot1 unit66.7 ms66.7 ms
Dash3 units200 ms200 ms
Gap inside a character1 unit66.7 ms66.7 ms
Gap between letters3 units200 ms463 ms
Gap between words7 units467 ms1,081 ms

Speed ladder

Overall speeds from slow to standard timing at 18 WPM. Move up a rung after a round of 90% or better.

  1. 6 WPM

    Letters 1,253 ms · words 2,923 ms

  2. 8 WPM

    Letters 858 ms · words 2,002 ms

  3. 10 WPM

    Letters 621 ms · words 1,449 ms

  4. 12 WPM

    Letters 463 ms · words 1,081 ms

    Now
  5. 14 WPM

    Letters 350 ms · words 818 ms

  6. 16 WPM

    Letters 266 ms · words 620 ms

  7. 18 WPM, standard

    Letters 200 ms · words 467 ms

Your practice history

How to use the Farnsworth trainer

  1. Choose what to copy: letter groups, letters and numbers, or common words.

  2. Set Speed, the character speed, and Farnsworth, the overall speed. The trainer starts at 18 and 12 WPM.

  3. Choose when to see the code: after you check, as it plays, or as bars only.

  4. Press Play, type what you hear, then press Check or Enter.

  5. After 10 items, read your score. At 90% of letters or better, move up a rung on the speed ladder.

What it does

Farnsworth timing keeps each character at its real speed and slows only the spacing, so you learn the sound of each letter from the start.

  • Character speed and overall speed. Two sliders: Speed for the characters, Farnsworth for the overall speed. Lower Farnsworth and only the gaps between letters and words grow.

  • Farnsworth sound. Five-letter groups, letters and numbers, or common words, played with the gaps worked out for your two speeds, at the Tone and Volume you choose.

  • See the code, or don’t. Keep it hidden until you check, watch each character appear as it is sent, or follow the dots and dashes drawn at true timing, long gaps and all.

  • Your copy, checked. Each letter is marked right, wrong, missed or extra, and a round of 10 ends with a score.

  • The timing, worked out. The formula with your numbers in it, and a table of the dot, dash and every gap in milliseconds, standard and with Farnsworth.

  • A speed ladder. Overall speeds from slow up to your character speed; after a good round the trainer offers the next rung.

How it works

Element timing follows ITU-R M.1677-1: a dot is one unit, a dash three, the gap inside a character one, between letters three and between words seven. One unit lasts 1,200 ÷ WPM milliseconds at the character speed.

The extra spacing follows the ARRL’s Farnsworth standard by Jon Bloom, KE3Z. The delay added to each word, (60c − 37.2s) ÷ (s × c) seconds, is shared 3 to 7 between the gaps between letters and words. The 50-unit standard word PARIS then takes 60 ÷ s seconds, just as it would at the overall speed with standard timing.

The sound, the bars and the character on screen all read one timeline, so they never drift apart. Nothing flashes: a flashing light is held to 7 WPM on this site, so the trainer draws the code instead, and with reduced motion on it shows each character once sent, with no moving playhead.

Copies made with the code hidden go into your accuracy, the daily review and your practice history. Copies made with it showing are scored but not counted.

Examples

At 18 WPM characters and 12 WPM Farnsworth, the trainer’s starting point.

One unit is 1,200 ÷ 18 = 66.7 ms, so a dot is 66.7 ms at any Farnsworth speed. The added delay per word is (60 × 18 − 37.2 × 12) ÷ (12 × 18) = 2.933 seconds. A letter gap becomes 463 ms instead of 200 ms, about 2.3 times as long, and a word gap 1,081 ms instead of 467 ms.

The word PARIS then takes 5.0 seconds with its word gap, the same as at 12 WPM standard timing, against 3.3 seconds at 18 WPM. To turn any other speed into milliseconds, look up the timing behind each speed.

The speed ladder at 18 WPM characters:

Letter and word gaps at 18 WPM characters for each rung of the Farnsworth ladder
FarnsworthGap between lettersGap between wordsPARIS takes
6 WPM1,253 ms2,923 ms10.0 s
8 WPM858 ms2,002 ms7.5 s
10 WPM621 ms1,449 ms6.0 s
12 WPM463 ms1,081 ms5.0 s
14 WPM350 ms818 ms4.3 s
16 WPM266 ms620 ms3.8 s
18 WPM (standard)200 ms467 ms3.3 s

After Farnsworth

Once you copy at standard timing, raise the character speed and start the ladder again, or move on to speed drills. For whole words instead of groups, copy the most common English words by ear. To see where you stand, test your copying speed.

Still learning the characters? Take the Koch lessons with Farnsworth spacing, one character at a time, or read about learning Morse code step by step.

Good questions

Frequently asked questions.

About Farnsworth timing

What is Farnsworth timing in Morse code?

Farnsworth timing sends each character at a fast speed and adds extra time between characters and words, so the overall speed is slower. The ARRL’s standard gives the example of characters at 20 WPM slowed to 10 WPM overall.

The dots, dashes and the gaps inside a character are never stretched; only the gaps between letters and between words grow.

Why learn Morse code with Farnsworth spacing?

So you learn each character as a sound, not as dots and dashes to count. Jon Bloom, KE3Z, explains in the ARRL standard that at very slow speeds learners count the elements, then have to switch to hearing rhythms above a few words per minute, which he calls the probable cause of the oft-mentioned “13-WPM barrier.”

With fast characters, counting never works, so you learn the rhythms from the start. Then only the gaps close as you improve, and the way you hear each character never changes.

What character speed should I use for Farnsworth?

The ARRL’s 1990 standard sends characters at 18 WPM for every speed below 18 WPM, and standard timing from 18 WPM up. Bloom adds that 18 WPM is not part of the idea: any character speed can be used.

The ARRL’s code practice files today use a 15 WPM character speed for 15 WPM and below, and standard timing from 18 WPM up. This trainer starts at 18 WPM characters with Farnsworth at 12 WPM; Speed goes from 10 WPM up, so the characters are never slow enough to count.

How is Farnsworth spacing calculated?

With c the character speed and s the overall speed, both in WPM, the delay added to each word is (60c − 37.2s) ÷ (s × c) seconds. It is shared 3 to 7 between the four letter gaps and the word gap of a word, 19 units in all, so a letter gap is 3/19 of it and a word gap 7/19.

At 18 WPM characters and 12 WPM overall, the delay is 2.933 seconds, a letter gap 463 ms instead of 200 ms, and a word gap 1,081 ms instead of 467 ms. The unit, 1,200 ÷ 18 = 66.7 ms, stays the same.

What does a Farnsworth speed like 5/18 mean?

Two speeds: the overall speed and the character speed. The ARRL standard writes the overall speed first, so 5/18 is 5 WPM overall with characters sent at 18 WPM.

Not every trainer or forum post uses that order. The character speed is always the larger number, or both are equal, which is standard timing.

When should I raise the Farnsworth speed?

When you copy a round well. This trainer suggests the next rung after a round of 10 with 90% of letters or better, the same bar the Koch method course uses to add a character.

The ladder climbs 2 WPM a rung, from 6 WPM to standard timing at 18 WPM: 6, 8, 10, 12, 14, 16, 18. Each step shortens the gaps; the characters keep the same sound.

Is Farnsworth the same as the Koch method?

No, and they work together. The Koch method decides which characters you practice, adding one at a time; Farnsworth decides the spacing. The Koch method course plays its lessons with the same Speed and Farnsworth settings as this trainer.

Is this Farnsworth trainer free, and does it work on a phone?

Yes. It runs in any modern browser, on a phone or a computer, with no account and no download. Nothing you type leaves your device.

Your Speed, Farnsworth, Tone and Volume are saved on this device and shared with the other drills. The Farnsworth slider goes down to 5 WPM.

Trust and limits

Private by design.
Honest about limits.

About this site
  • On your device

    Runs in your browser

    No account, no download and no uploads. It works in any modern browser, on a phone or a computer.
  • Private

    Saved on this device

    Your scores and sound settings are kept on this device and shared with the other trainers.
  • Know the limits

    What it covers

    Receiving by ear: letters, digits and common words. It doesn’t train sending, punctuation or prosigns.
  • ITU-R M.1677-1

    Tested against the standards

    Codes follow ITU-R M.1677-1 and spacing the ARRL’s Farnsworth standard, and every time on this page is made by the tool’s own code. Written by Aman Singh for Translate Morse Code, an independent site; last updated November 2026.

Sources

Last checked November 2026

An outside opinion

Ask your favorite AI
about Translate Morse Code.

Already have an AI you turn to? Let it help you decide if this is the right Morse code tool for you.

Opens your chosen AI. Sign-in and prompt support vary; you can copy the question below.

What are we asking?
The question

I'm thinking about using Translate Morse Code (https://translatemorsecode.com/) to translate and learn Morse code. What does it do well, what are its limits, and is it a good fit for me? Please look at the site itself before answering.

AI can get details wrong. The quickest check is the translator itself: it is free and needs no sign-up.