Morse code necklace designer
Turn a name, a date or a word into a Morse code necklace, engraved or beaded. Check what it says, then take the file or the bead list to a jeweler or your craft table. Free, no sign-up.
Piece
Metal
Layout
Chain
Preview
SilverThe pendant, close up
Enlarged, with a ruler in mm
Bar 40 × 8 mm on an 18 in chain · dots 0.85 mm
.-.. --- ...- .
The engraving file is the marks at real size (and the letters, if on), for a jeweler or a laser engraver. The engraving sheet adds a true-size proof, the parts and the steps.
How to use
Enter a name, initials, a date or a short word, or start from MAMA, ILY or another example.
Pick the piece: a bar or disc pendant, a beaded section on a chain, or a ring in your size.
Choose the metal. For beads, choose a bead size and a stone or metal for the dots and for the dashes.
Check the code under the piece, turn on the letters to read it letter by letter, and watch the dot size on small pieces.
Download the engraving file for a jeweler, or copy the bead list to make it yourself. Copy link sends the exact design to someone else.
What it does
This Morse code necklace generator draws the piece, not just the dots and dashes, so you see a custom name necklace before anyone makes it.
Four pieces. A 40 × 8 mm bar, a 20 mm disc, a ring from US 4 to 13, or beads on a 16, 18 or 20 in chain.
Metal and stones. Silver, gold, rose gold or black steel; beads in metal or any of the twelve birthstones.
A file for a jeweler. An SVG at real size in millimeters: the marks, and the letters if you want them.
A bead list. Round beads, long beads and spacers to buy, the order, and the length.
Read a necklace. Tap in the marks on a piece you were given and see the words.
It is a designer, not a shop: the site sells no jewelry. For a whole bracelet of beads, use the bracelet designer.
How it works
The code
Each letter gets its code from the ITU-R M.1677-1 standard for International Morse code, the table behind the Morse code alphabet.
How a piece draws it
Engraved, a dash is 2.6 dots long, letters sit 2.6 dots apart and words 5: a little tighter than the 3 and 7 units of radio timing, so a short bar holds more letters. Bigger dots wraps the letters onto more lines when that makes the marks larger.
Beaded, a dot is a round bead and a dash a long bead 2.5 times its width, like a tube bead or a baguette stone. One half-size spacer separates letters and three separate words, so the gaps hold when beads slide on the chain.
Ring sizes and birthstones
ISO 8653 sizes a ring by its inner circumference in millimeters; each whole US size adds 0.81 mm of inside diameter, so US 7 is 54.4 mm around. The band in the file is that long and 6 mm wide. The birthstones are one per month from the American Gem Society’s list, from garnet in January to turquoise in December.
Examples
Popular necklace words, with what they take:
| Word | Morse code | Dots, dashes | Dot size on the bar | Beaded, 3 mm beads |
|---|---|---|---|---|
| MAMA | -- .- -- .- | 2, 6 | 1.06 mm | 55.5 mm (2.2 in) |
| ILY | .. .-.. -.-- | 6, 4 | 1.06 mm | 51.0 mm (2.0 in) |
| LOVE | .-.. --- ...- . | 7, 5 | 0.85 mm | 63.0 mm (2.5 in) |
| FAITH | ..-. .- .. - .... | 10, 3 | 0.85 mm | 58.5 mm (2.3 in) |
| ALWAYS | .- .-.. .-- .- -.-- ... | 10, 8 | 0.55 mm; 1.06 mm on two lines | 97.5 mm (3.8 in) |
| I LOVE YOU | .. / .-.. --- ...- . / -.-- --- ..- | 12, 12 | 0.74 mm on three lines | 142.5 mm (5.6 in) |
MAMA by hand: 2 round beads of 3 mm, 6 long beads of 7.5 mm and 3 spacers of 1.5 mm make 6 + 45 + 4.5 = 55.5 mm. On the 20 mm disc, LOVE on one line has 0.37 mm dots; Bigger dots stacks the letters and makes them 1.28 mm.
Direction matters: read from the other end, ILY’s .. .-.. -.-- spells QFI. SOS fits the bar with 1.22 mm dots; the first official telegraph message, What hath God wrought, shrinks to 0.48 mm and suits beads better. More words: Mom, I love you.
Good questions
Frequently asked questions.
About the necklace designer
How do I get a Morse code necklace made?
Design it here, press Download engraving SVG, and send the file to a jeweler or an online engraving service with the metal and chain length. The file holds the marks, and the letters if they are on, at the size of the piece, ready for a laser engraver. For stones or beads, send the picture and the bead list; Copy link opens the same design for them.
How many letters fit on a Morse code necklace?
Three to five letters read best on one line of the 40 mm bar: MAMA’s dots are 1.06 mm and FAITH’s 0.85 mm.
Longer words fit but shrink, and the tool warns below 0.6 mm; Bigger dots puts ALWAYS on two lines at 1.06 mm.
The 20 mm disc suits initials or a short word stacked. Beads have no letter limit, only length: ALWAYS in 3 mm beads runs to about 10 cm.
How do I make a Morse code necklace myself?
Pick Beads, choose a bead size and colors, and press Copy bead list. You need the beads and spacers it lists, a fine chain or beading wire, two crimp beads, a clasp and flat-nose pliers. Thread the beads in the listed order, letter by letter, then crimp both ends so the section stays centered.
How do I read what a Morse code necklace says?
Switch to Read a necklace. Tap Dot or Dash for each mark from left to right, and Letter gap at each space or spacer bead.
The words appear as you tap, with the reading from the other end too, since a necklace can be held either way up. Design this opens the words in the designer.
Can a Morse code necklace say “I love you”?
Yes. In full it is .. / .-.. --- ...- . / -.-- --- ..-, 24 marks in three words: a bar on three lines, or about 14 cm of 3 mm beads.
ILY, .. .-.. -.--, says it in 10 marks on one line. 143 is a number code from pagers, not Morse; in Morse it would be 15 marks. Hear it on I love you in Morse code.
Is Morse code legal?
Yes. Anyone may wear, write, tap or flash Morse code.
Only sending it by radio is regulated, by the same rules as voice: on amateur bands you need an amateur license (in the US, from the FCC). A necklace is a message in a public code, readable by anyone who looks it up.
Trust and limits
Private by design.
Honest about limits.
On your device
Drawn on your device
Everything is drawn on your device; no text or design is sent to a server.In the link
Rides in the link
The message stays in this browser for the other make tools and rides in the address after the #, and Copy link adds the piece, metal and sizes.Know the limits
Know the limits
A design holds 40 characters of International Morse code; anything without a code is named and left out. Previews are drawings, so colors are close, not exact. Letters in the engraving file are text in a common font: ask the jeweler to match it or turn it into outlines.Who keeps it
Not paid by jewelers
The site sells no jewelry and is not paid by any jeweler. Maintained by Translate Morse Code, an independent site; last updated October 2026.