Sound-alike drill
Drill the characters that sound alike: E I S H 5, T M O 0, A U V 4 and more. Hear one, pick it from its set, and see which one trips you up. Every answer feeds your review.
Hear one of these, then pick which it was. 20 a round.
How to use
Pick a set, such as E I S H 5 or T M O 0. Each set holds characters that sound alike.
Set the speed, tone and volume under the drill if you want to. The speed runs from 10 to 40 WPM.
Press Start. One character from the set plays.
Pick which it was, from that set only: tap its button, press the character, or press the button's number (a digit in the set answers as itself). Press Hear it again if you missed it.
After 20 characters, read your score and the score for each character, then press Go again. Press Stop to end early.
What it does
It isolates the mistakes learners make most: hearing S as H, M as O, or A as U. Each round uses one set, so every option is a near miss.
Eight sound-alike sets. Runs of dots, runs of dashes, shared shapes and characters that start alike.
20 characters a round. Each is picked at random from the set.
Instant feedback. A miss shows what played and what you chose, both with their codes.
A score for each character. See at a glance which one trips you up.
A quick count. The results show how many right answers came within 1.5 seconds.
Feeds your review. Every answer goes into your learning progress, shared with the other drills.
How it works
Morse timing follows the PARIS standard: one unit lasts 1,200 ms divided by the WPM. A dot is one unit, a dash three, and the gap inside a character one unit. So each extra dot adds two units, and each extra dash four.
That makes neighbors in a set close in length. At 20 WPM, S lasts 300 ms and H 420 ms: a difference of 120 ms. At slow speeds you can count the dots; at speed you can't, and you have to know the sound.
Each round plays 20 characters picked at random from the set, and you answer from that set only. Your reaction time counts from the moment the character ends. A right answer within 1.5 seconds counts as quick, and only quick answers move a character up in the daily review; an answer given before the character has finished is not timed.
Examples
The eight sets and their codes:
| Set | What they share | Codes in order |
|---|---|---|
| E I S H 5 | One to five dots | . .. ... .... ..... |
| T M O 0 | One to five dashes | - -- --- ----- |
| A U V 4 | Dots, then one dash | .- ..- ...- ....- |
| N D B 6 | One dash, then dots | -. -.. -... -.... |
| R L F | A dot dash dot inside | .-. .-.. ..-. |
| W J P 1 | A dot, then dashes | .-- .--- .--. .---- |
| G Z Q 7 | Two dashes first | --. --.. --.- --... |
| K C Y X | Dash dot dash shapes | -.- -.-. -.-- -..- |
How long the dot and dash sets last, at 20 and 25 WPM:
| Character | Code | Units | 20 WPM | 25 WPM |
|---|---|---|---|---|
| E | . | 1 | 60 ms | 48 ms |
| I | .. | 3 | 180 ms | 144 ms |
| S | ... | 5 | 300 ms | 240 ms |
| H | .... | 7 | 420 ms | 336 ms |
| 5 | ..... | 9 | 540 ms | 432 ms |
| T | - | 3 | 180 ms | 144 ms |
| M | -- | 7 | 420 ms | 336 ms |
| O | --- | 11 | 660 ms | 528 ms |
| 0 | ----- | 19 | 1,140 ms | 912 ms |
The dash set spreads out more than the dot set, because each dash adds four units. M and O are 240 ms apart at 20 WPM, while H and 5 are only 120 ms apart.
Tips for hearing the difference
Listen for rhythm. S and H differ by one dot: hear the length of the whole, not the count.
Keep the speed up. At 20 WPM and faster, each character is a distinct sound.
Drill the worst set. Go back to the set where your per-character scores are lowest.
Keys. Press the character, or the button's number; a digit in the set answers as itself.
Trust and limits
Private by design.
Honest about limits.
On your device
Runs in your browser
The tones are made on your device, and your answers are saved in your learning progress on this device only.Know the limits
No punctuation
The sets cover letters and digits, not punctuation.ITU-R M.1677-1
International Morse
Codes follow the International Morse code (ITU-R M.1677-1). Maintained by Translate Morse Code, an independent site; last updated November 2026.
Good questions
Frequently asked questions.
About the sound-alike drill
Which Morse characters are easiest to confuse?
Ones that differ by a single element: E I S H and 5 (one to five dots), T M O and 0 (one to five dashes), and pairs like S and H, M and O, U and V, or D and B. Mirror pairs such as A and N, or L and F, trip learners up too; the R L F set holds L and F.
Why only choose from the set?
Because the only way to answer is to hear the difference. In a full quiz, you could rule options out by their length or their first sound. Here every option starts the same way.
How do I tell S from H by ear?
Listen to the length of the whole sound, not the dots. S (...) lasts 5 units and H (....) lasts 7, so at 20 WPM S is 300 ms and H is 420 ms. With practice, H simply sounds longer.
What speed should I drill at?
Faster than feels comfortable: 20 WPM or more. At slow speeds you can count the dots, and counting stops working as you speed up.
At speed each character becomes its own sound. Set the speed from 10 to 40 WPM in the sound settings.
What does quick mean in the results?
A right answer given within 1.5 seconds of the character ending. A quick answer shows you know the sound rather than working it out. In your daily review, a quick right answer moves a character up a step; a slow one keeps it where it is.
Can I use the keyboard?
Yes. Press the character itself, such as S or 5, or the number of its button, 1 to 5 from the left. Where a set contains a digit, pressing that digit answers with it.
Do my answers count toward the daily review?
Yes. Every answer is saved in your learning progress on this device. Characters you miss here come back in the daily review, mixed with everything else you are learning.