Morse code keyboard
A Morse code keyboard you tap or type: hold for a dash, tap for a dot, and each letter appears as you key it. Works with touch, a mouse or a keyboard. On a phone? Add Gboard’s Morse keyboard.
Your text
Morse
Dash from 300 ms (Medium)
Tap speed
A letter ends after
- Tap mode on one keyA quick tap is a dot, a hold a dash
- It learns your timingThe dash point moves to fit your own rhythm
- Two keys modeA dot key and a dash key, with no timing
How to use
Choose Tap (one key) or Two keys (a dot key and a dash key).
In Tap, tap the pad quickly for a dot and hold it for a dash; on a computer, hold Space or Ctrl the same way. In Two keys, press Dot or Dash (J and K on a keyboard).
Pause and the letter appears. For a gap between words, pause longer (in Tap) or press the Space button.
Made a mistake? Press Back (or Backspace) to remove the last mark or letter.
Copy the text or its Morse, or send it to the translator, flashlight, vibration, ringtone and other tools.
How to get the Morse code keyboard on Android and iPhone (Gboard)
Google’s Gboard keyboard has a Morse code layout with a dot key and a dash key, on Android and iPhone (Android from May 2018, iPhone from July 2018). These steps are from Google’s Gboard help page.
Android:
- Install Gboard from the Play Store.
- Open Settings, then System, Languages & input, Virtual keyboard, Gboard, Languages, and English (US).
- Swipe to Morse code, select it and tap Done.
- In any text box, tap the globe key until the Morse layout shows.
Morse code is a layout of English (US), not a language of its own, so if it isn’t in the list of languages, open English (US) and swipe right through the layouts. It needs Android 5.0 or later.
iPhone and iPad:
- Install Gboard from the App Store.
- Open the Gboard app, tap Languages, Add language, then Morse Code (US). With more than three languages, remove one first.
- In any text box, touch and hold the globe key and pick Morse code (US).
Gboard’s Morse settings:
- Sound on keypress
- Character timeout, how long it waits before a letter (Never means you send each letter with the space bar)
- Key repeat
- Word timeout, off by default
Two keys mode here works the same way, so you can practice before you install.
Google’s help page describes the Morse layout for phones and tablets. On a computer, use Two keys here instead: J or the period for a dot, K or the hyphen for a dash. For games and learning tools, Google’s help page points to g.co/morse.
What it does
This Morse code keyboard reads what you key and writes it as text, one letter at a time.
- Tap mode, a Morse code tapper on one keyA quick tap is a dot, a hold is a dash. While you hold, the pad shows the dot turning into a dash and a tone sounds.
- It learns your timingAfter a few dots and dashes, the dash point moves to fit your own rhythm.
- Two keys modeA dot key and a dash key, like Gboard’s Morse layout. Nothing depends on timing, so it suits beginners and switch users.
- Hints as you keyEvery letter the code could still become:
..could become U, S, H, V or F. - Text and MorseYour text and its Morse code, each with a Copy button.
- Practice wordsSOS, HELLO, I LOVE YOU or HELP, checked letter by letter.
- Send it onOpen your message in the translator, flashlight, vibration and other tools.
To type letters and get Morse instead, use the Morse code translator.
How it works
Morse timing follows ITU-R M.1677-1: a dot is one unit and a dash three; the gap is one unit inside a letter, three between letters and seven between words. On one key, only the length of each press tells a dot from a dash, so the tool sets a dash point near two units: a press shorter than it is a dot, a longer one a dash.
| Tap speed | Dash from | About |
|---|---|---|
| Slow | 450 ms | 5 WPM |
| Medium (default) | 300 ms | 8 WPM |
| Fast | 200 ms | 12 WPM |
A letter ends after a pause of 700 ms (Quick) or 1.1 s (Relaxed), and in Tap mode a word after 1.6 s or 2.5 s: longer than the standard’s gaps, because people tapping by hand pause to think. With Space only, nothing ends until you press the Space button (or Enter in Tap mode, where the space bar is the key).
Learn my timing looks at your last 12 presses. Once at least two are short and two long (at least 1.8 times as long), the dash point moves to the middle of the two groups on a ratio scale: dots of 100 and 110 ms and dashes of 330 and 350 ms move it from 300 ms to 189 ms. It stays between 80 and 900 ms.
A knock on a desk can’t be held, so it can’t be a dash: every knock sounds the same. Tapping Morse works where a press has a length, such as a screen, a key, or a finger held on someone’s arm.
Examples
Tapped words, with a tap for each dot and a hold for each dash:
| Word | Morse code | Taps and holds | Presses |
|---|---|---|---|
| SOS | ... --- ... | 3 taps, 3 holds, 3 taps | 9 |
| HELLO | .... . .-.. .-.. --- | 11 taps, 5 holds | 16 |
| I LOVE YOU | .. / .-.. --- ...- . / -.-- --- ..- | 12 taps, 12 holds | 24 |
| HELP | .... . .-.. .--. | 10 taps, 3 holds | 13 |
L, for example, is tap, hold, tap, tap (.-..): one short press, one long, two short, then a pause. SOS keyed with no pause between the letters reads as one signal, ...---..., shown as <SOS>.
Good questions
Frequently asked questions.
About the Morse keyboard
Can you do Morse code just by tapping?
Yes. Tap quickly for a dot, hold for about three times as long for a dash, and pause between letters.
Tap mode on this page reads that rhythm and writes the letters. On a hard surface a knock can’t be held, so people knocking use spacing or tap code instead.
How do you tap Morse code with your finger?
Press and release quickly for a dot; press and hold, about three dots long, for a dash. Leave a short pause between letters and a longer one between words. A screen, a key or a finger pressed on someone’s arm all work, because each press has a length you can see or feel.
How do you say I love you in Morse code by tapping?
Tap .. / .-.. --- ...- . / -.-- --- ..-: I is two taps; L is tap, hold, tap, tap; O is three holds; V is three taps and a hold; E is one tap; then Y, O and U. Pause between letters and longer between words. Pick I LOVE YOU under Try tapping to practice it.
What does 3 taps in Morse code mean?
Three quick taps are the letter S (...); three long presses are O (---). Three taps, three holds and three taps spell SOS, the distress signal. In crosswords, “Morse code tap” in three letters is usually DIT (a dot), and sometimes DAH, DOT or SOS.
Is tap code the same as Morse code?
No. Tap code puts the alphabet on a 5 by 5 grid and sends each letter as two groups of knocks, its row and then its column; every knock is the same.
Morse uses short and long signals. For tap code, use the Tap code translator.
How do you type Morse code?
Key it as dots and dashes. On a computer, use Two keys here: J or the period for a dot, K or the hyphen for a dash, Space to end a letter and again for a word; in Tap mode, hold Space or Ctrl.
On a phone, add Gboard’s Morse layout (steps above). To turn typed letters into Morse instead, use the Morse code translator.
Can Google decode Morse code?
Google’s Gboard keyboard decodes the Morse you type: press its dot and dash keys and it turns each sequence into a letter, as Google’s Gboard help page describes. Two keys mode here does the same in a browser. To decode Morse someone sent you, paste it into the Morse code translator, or open a recording in the Morse code audio translator.
How do you learn Morse code tapping?
As a beginner, start with Two keys or the Slow tap speed, and leave Learn my timing on. Tap the practice words until they come out right, then try your own.
To recognize letters by sound before you tap them, learn them by ear with the Koch method course. For a game, key falling letters before they land in Signal Rain, or type whole words in dots and dashes in Code sprint.
Can I use a real Morse key?
Yes, if it sends a key press: some USB Morse key adapters send Ctrl, which Tap mode reads as the key. Most Morse code tappers sold online are straight keys, also called telegraph keys. For paddles, MIDI keys and a timing score, use the Morse code simulator.
Trust and limits
Private by design.
Honest about limits.
On your device
Runs in your browser
The keyboard runs in your browser: nothing you key is uploaded or stored, and your mode and settings are saved on this device only.Know the limits
Tapping has limits
Tapping is read from the length of each press, so a very uneven rhythm can still split or join letters: switch to Two keys or Space only for exact input. Sound plays through your speaker; on an iPhone, check the silent switch.ITU-R M.1677-1
Reads the standard table
It reads the International Morse table (ITU-R M.1677-1): letters, numbers, punctuation and a few accented letters; a code with no character becomes a question mark.Who keeps it
Tested and maintained
The tap reader’s rules (the dash point, learning your timing within 80 to 900 ms, letter and word breaks) and the practice checks are covered by the site’s automated tests, and the letters come from the same International table as the translator. Maintained by Translate Morse Code, an independent site; last updated October 2026.