Skip to main content

On the air29 units

73 in Morse code

73 in Morse code is --... ...--, and it means best regards. Operators key it near the end of a contact and write it at the foot of notes to one another, always as the bare number: not 73s, and not best 73. Low-power operators have a variant of their own, 72, and by one telegraph historian's account the meaning took about fifty years to settle.

73

Hear it at your speed (WPM)

Speed

At 18 WPM it takes 1.9 seconds (29 units).

Digit by digit

Every digit of the phrase, with its code and how it sounds. Tap a digit to learn it.

From my love to you to best regards

Louise Ramsey Moreau, W3WRE, traced the first authentic use of 73 to The National Telegraphic Review and Operators' Guide, first published in April 1857, where it meant "My love to you". In the 92 Code that Western Union set up in 1859 it became "accept my compliments".

Manuals over the next four decades varied the wording, and a 1908 edition of the Dodge Manual gave the definition used today: best regards.

The lists never fully agreed. The 92 Code table on Wikipedia glosses 73 as "I wish you well" in American use and "Best regards" in British.

Hear the difference: the first card plays “73” at full speed, the second plays the same digits with a word-length pause after each, the way to learn it by ear.

Play at full speed

--... ...--

29 units · 1.9 s at 18 WPM

Play spaced out

--... / ...--

33 units · 2.2 s at 18 WPM

Which one is “73”?

Test your ear in three rounds, two by sound and one by light. Each round plays three signals; pick the real “73”.

Round 1 of 3 · by sound

How it’s timed. A dot lasts one unit and a dash three. “73” has 6 dots and 4 dashes, 18 units of sound, plus 8 1-unit gaps inside letters and 1 3-unit gap between letters: 29 units in all. At 18 WPM one unit lasts 67 ms, so it takes 1.9 seconds.

Digits
2
Words
1
Dots and dashes
6 · 4
Length
29 units
At 18 WPM
1.9 s
Collection
On the air

How to send “73”

The rhythm is the same whatever you send it with: short for a dot, three times as long for a dash, a short pause between letters and a longer one between words.

  • By sound

    Hum it, whistle it or press a buzzer: short for a dot, about three times as long for a dash, with a short pause between letters. Turn on Repeat in the player above to hear it on a loop, or make it your phone's alert with the Ringtone maker.

  • By light

    Flash a flashlight, a phone light or a lamp. A clear difference between short and long matters more than speed: at 7 WPM a short flash lasts 0.17 s and a long one 0.51 s. Turn on Light in the player, or open the Flashlight signaler with “73” loaded.

  • Tap or knock it

    A tap can't be held, so use spacing: quick taps for dots, slower taps for dashes. Knocking on a wall is usually tap code instead, where each letter is its row and then its column on a 5 by 5 grid. In tap code, “73” is , and the Tap code translator knocks it out for you.

  • Blink it

    Quick blinks for dots, eyes held shut a little longer for dashes, and a pause between letters. “73” takes 10 blinks in all, so it works best face to face with someone who knows it is coming.

  • Feel it

    Squeeze a hand, short and long, so only the two of you know. On a phone, Vibrate in the player buzzes it on Android and taps it on an iPhone with iOS 18 or later, and the Vibration pattern tool lets you change the speed or copy the pattern for an app or a watch.

To tap it on a screen and see each letter as you key it: Morse keyboard

“73” next to similar phrases

How “73” compares with phrases people send alongside it, each played at 18 WPM.

PhraseIn MorseLength
73--... ...--29 units, 1.9 s
88---.. ---..33 units, 2.2 s
Thank you- .... .- -. -.- / -.-- --- ..-85 units, 5.7 s
CQ-.-. --.-27 units, 1.8 s
PARIS.--. .- .-. .. ...43 units, 2.9 s

Where 73 goes in a closing

In the IARU operating guide's model ending, 73 follows the thanks and comes just before the final signal: TKS FER QSO 73 ES CUL W1ZZZ DE G3ZZZ SK, thanks for the contact, best regards and see you later, then SK for end of contact. The guide's sample exchange ends more briefly still, on the second station's last over, 73 JOHN CUL DE G4ZZZ SK, which puts the 73 first.

Never 73s, never best 73

The same guide is blunt about grammar. Since 73 already means best regards, "never say or write 73s, best 73 or best 73s; all of these are corruptions."

On voice radio it is spoken as seventy three, not seventy threes. Hams also use it to close written messages to each other, in place of sincerely or similar formal endings.

72 for low power

Operators running QRP, meaning low power, sign 72 for best regards instead. It is --... ..---, 31 units: the same 7, followed by a 2 in place of the 3.

Hear it

  • 72
    --... ..---

Make “73” into something

Each tool opens with the phrase already filled in.

Good questions

Frequently asked questions.

Why is 73 Sheldon Cooper's favorite number?

In The Big Bang Theory, Sheldon explains it himself in The Alien Parasite Hypothesis (2010): 73 is the 21st prime, its mirror 37 is the 12th prime, and 12 mirrors 21, which is 7 times 3. In binary, 73 is 1001001, which reads the same both ways. None of it has to do with the radio sign-off.

What does 73 ES 88 mean?

Best regards and love and kisses, with ES, the operators' and, between them. It is sent as --... ...-- / . ... / ---.. ---.. and is kept for family and close friends; to anyone else, 73 alone is enough. The 88 page covers the second number.

Why do 7 and 3 look like mirror images in Morse?

Every digit has five marks, and the digits after 5 swap dots for dashes from the front. 7 is two dashes and three dots, --..., and 3 is three dots and two dashes, ...--, so 73 reads the same from either end.

Characters to know

The characters “73” leans on, each with a page of its own.

An outside opinion

Ask your favorite AI
about Translate Morse Code.

Already have an AI you turn to? Let it help you decide if this is the right Morse code tool for you.

Opens your chosen AI. Sign-in and prompt support vary; you can copy the question below.

What are we asking?
The question

I'm thinking about using Translate Morse Code (https://translatemorsecode.com/) to translate and learn Morse code. What does it do well, what are its limits, and is it a good fit for me? Please look at the site itself before answering.

AI can get details wrong. The quickest check is the translator itself: it is free and needs no sign-up.