Skip to main content

On the air27 units

CQ in Morse code

CQ in Morse code is -.-. --.-, the call that asks any station listening to reply. If you hear it on the air, someone is looking for a contact, and any licensed station may answer. If you are about to send it, the two letters are only the start: check that the frequency is clear, repeat your own call sign a few times, and close the call so listeners know they may come back.

CQ

Hear it at your speed (WPM)

Speed

At 18 WPM it takes 1.8 seconds (27 units).

Letter by letter

Every letter of the phrase, with its code and how it sounds. Tap a letter to learn it.

From cable offices to the Titanic: CQ and CQD

CQ is older than radio. UK landline and undersea cable telegraphers used it first, and the earliest reference Wikipedia cites is Electrical Tables and Formulæ, from 1871: "The call for 'all stations' (C Q)". The Marconi Company took it into wireless in 1904, and the 1912 London International Radiotelegraph Convention adopted it for all.

Marconi also proposed a distress form in 1904, CQD, -.-. --.- -.., the general call with D added. SOS replaced it between 1906 and 1908, yet when the Titanic sank in 1912 it "initially transmitted the distress call CQD DE MGY", before alternating with SOS.

Hear it

  • CQD
    -.-. --.- -..

Hear the difference: the first card plays “CQ” at full speed, the second plays the same letters with a word-length pause after each, the way to learn it by ear.

Play at full speed

-.-. --.-

27 units · 1.8 s at 18 WPM

Play spaced out

-.-. / --.-

31 units · 2.1 s at 18 WPM

Which one is “CQ”?

Test your ear in three rounds, two by sound and one by light. Each round plays three signals; pick the real “CQ”.

Round 1 of 3 · by sound

How it’s timed. A dot lasts one unit and a dash three. “CQ” has 3 dots and 5 dashes, 18 units of sound, plus 6 1-unit gaps inside letters and 1 3-unit gap between letters: 27 units in all. At 18 WPM one unit lasts 67 ms, so it takes 1.8 seconds.

Letters
2
Words
1
Dots and dashes
3 · 5
Length
27 units
At 18 WPM
1.8 s
Collection
On the air

How to send “CQ”

The rhythm is the same whatever you send it with: short for a dot, three times as long for a dash, a short pause between letters and a longer one between words.

  • By sound

    Hum it, whistle it or press a buzzer: short for a dot, about three times as long for a dash, with a short pause between letters. Turn on Repeat in the player above to hear it on a loop, or make it your phone's alert with the Ringtone maker.

  • By light

    Flash a flashlight, a phone light or a lamp. A clear difference between short and long matters more than speed: at 7 WPM a short flash lasts 0.17 s and a long one 0.51 s. Turn on Light in the player, or open the Flashlight signaler with “CQ” loaded.

  • Tap or knock it

    A tap can't be held, so use spacing: quick taps for dots, slower taps for dashes. Knocking on a wall is usually tap code instead, where each letter is its row and then its column on a 5 by 5 grid. In tap code, “CQ” is 1,3 4,1, and the Tap code translator knocks it out for you.

  • Blink it

    Quick blinks for dots, eyes held shut a little longer for dashes, and a pause between letters. “CQ” takes 8 blinks in all, so it works best face to face with someone who knows it is coming.

  • Feel it

    Squeeze a hand, short and long, so only the two of you know. On a phone, Vibrate in the player buzzes it on Android and taps it on an iPhone with iOS 18 or later, and the Vibration pattern tool lets you change the speed or copy the pattern for an app or a watch.

To tap it on a screen and see each letter as you key it: Morse keyboard

“CQ” next to similar phrases

How “CQ” compares with phrases people send alongside it, each played at 18 WPM.

PhraseIn MorseLength
CQ-.-. --.-27 units, 1.8 s
73--... ...--29 units, 1.9 s
88---.. ---..33 units, 2.2 s
PARIS.--. .- .-. .. ...43 units, 2.9 s
YYZ-.-- -.-- --..43 units, 2.9 s

Calling CQ the way the IARU guide teaches

Ethics and Operating Procedures for the Radio Amateur, the IARU guide by ON4UN and ON4WW, sets out the routine:

  • Listen first, then send QRL?, meaning is this frequency in use?, at least twice with a few seconds between. A lone question mark asks nothing.
  • Call at the speed you want to be answered, as in the guide's CQ CQ G3ZZZ G3ZZZ G3ZZZ AR, sent as one short call.
  • Give your call two to four times, and prefer several short CQs to one long one.
  • Finish with AR, not K. K means over to you, and "there is nobody there yet whom you can turn it over to". PSE K adds nothing.

Not every reference agrees on that last step: Wikipedia's account of CQ has the caller inviting replies with K.

CQ DX, CQ JA, CQ TEST: aiming the call

A word after CQ says who should answer. CQ DX asks for stations on other continents, and a country prefix narrows it further: CQ JA for Japan, CQ VK for Australia, CQ NA for North America.

In contests the tag is TEST, and the guide's fastest contest call drops CQ altogether, DL0ZZZ TEST, leaving only the call sign and the tag. CQ belongs mostly to Morse and single-sideband voice on shortwave; on FM and repeaters it is rarely heard.

Make “CQ” into something

Each tool opens with the phrase already filled in.

Good questions

Frequently asked questions.

Should a CQ end with K or AR?

The IARU operating guide says AR. K hands the frequency to a station you are already working, and after a CQ nobody has answered yet.

Where it discusses answering a CQ, the guide adds a practical reason to prefer AR after a call sign: a K sent close to it can be copied as its last letter, while AR, sent as one character, cannot. Some references, Wikipedia among them, still describe ending with K.

What does CQ stand for?

It is not short for a set phrase. Operators explain it by sound: said aloud, C Q is seek you, which is what the call does. The letters were a telegraph office convention long before anyone needed to explain them.

How do you answer a CQ?

Wait until the caller has finished, then send your own call sign at about the caller's speed, often after the caller's call and DE, as in G3ZZZ DE W1ZZZ. If the caller comes back with your call sign, the contact has started; if they come back with someone else's, wait for the next CQ.

Characters to know

The characters “CQ” leans on, each with a page of its own.

An outside opinion

Ask your favorite AI
about Translate Morse Code.

Already have an AI you turn to? Let it help you decide if this is the right Morse code tool for you.

Opens your chosen AI. Sign-in and prompt support vary; you can copy the question below.

What are we asking?
The question

I'm thinking about using Translate Morse Code (https://translatemorsecode.com/) to translate and learn Morse code. What does it do well, what are its limits, and is it a good fit for me? Please look at the site itself before answering.

AI can get details wrong. The quickest check is the translator itself: it is free and needs no sign-up.