Greetings and celebrations13 units
Hi in Morse code
Hi in Morse code is .... .., the letters H and I. Someone reading it letter by letter, a friend or a classmate, will decode a plain hi. A radio operator may not: in the operators' abbreviation lists HI stands for laughter, so dropped into a contact it comes across as a chuckle. To greet an operator, spell out hello or use a greeting tied to the hour.
Hear it at your speed (WPM)
At 18 WPM it takes 0.9 seconds (13 units).
Letter by letter
Every letter of the phrase, with its code and how it sounds. Tap a letter to learn it.
Send hi to a ham and you send a laugh
The IARU guide Ethics and Operating Procedures for the Radio Amateur, by John Devoldere ON4UN and Mark Demeuleneere ON4WW, defines HI in three words: laughter in CW. William Pierpont's textbook The Art & Skill of Radio-Telegraphy gives it as high, or laugh. Neither list offers it as a greeting.
So the setting decides what the same two letters say. Tapped on a desk to a friend, hi is hi. Keyed during a radio contact, it is the laugh those lists describe.
Hear the difference: the first card plays “Hi” at full speed, the second plays the same letters with a word-length pause after each, the way to learn it by ear.
.... ..
13 units · 0.9 s at 18 WPM
.... / ..
17 units · 1.1 s at 18 WPM
Which one is “Hi”?
Test your ear in three rounds, two by sound and one by light. Each round plays three signals; pick the real “Hi”.
Round 1 of 3 · by sound
How it’s timed. A dot lasts one unit and a dash three. “Hi” has 6 dots and 0 dashes, 6 units of sound, plus 4 1-unit gaps inside letters and 1 3-unit gap between letters: 13 units in all. At 18 WPM one unit lasts 67 ms, so it takes 0.9 seconds.
- Letters
- 2
- Words
- 1
- Dots and dashes
- 6 · 0
- Length
- 13 units
- At 18 WPM
- 0.9 s
- Collection
- Greetings and celebrations
How to send “Hi”
The rhythm is the same whatever you send it with: short for a dot, three times as long for a dash, a short pause between letters and a longer one between words.
By sound
Hum it, whistle it or press a buzzer: short for a dot, about three times as long for a dash, with a short pause between letters. Turn on Repeat in the player above to hear it on a loop, or make it your phone's alert with the Ringtone maker.
By light
Flash a flashlight, a phone light or a lamp. A clear difference between short and long matters more than speed: at 7 WPM a short flash lasts 0.17 s and a long one 0.51 s. Turn on Light in the player, or open the Flashlight signaler with “Hi” loaded.
Tap or knock it
A tap can't be held, so use spacing: quick taps for dots, slower taps for dashes. Knocking on a wall is usually tap code instead, where each letter is its row and then its column on a 5 by 5 grid. In tap code, “Hi” is 2,3 2,4, and the Tap code translator knocks it out for you.
Blink it
Quick blinks for dots, eyes held shut a little longer for dashes, and a pause between letters. “Hi” takes 6 blinks in all, so it works best face to face with someone who knows it is coming.
Feel it
Squeeze a hand, short and long, so only the two of you know. On a phone, Vibrate in the player buzzes it on Android and taps it on an iPhone with iOS 18 or later, and the Vibration pattern tool lets you change the speed or copy the pattern for an app or a watch.
To tap it on a screen and see each letter as you key it: Morse keyboard
“Hi” next to similar phrases
How “Hi” compares with phrases people send alongside it, each played at 18 WPM.
Why the laugh is HI and not HA
In a 2015 piece for The Conversation, Lauren B. Collister of the University of Pittsburgh called HI HI a favorite among amateur radio operators. Some sources, she noted, speculate that it began as an imitation of someone chuckling; that remains a guess. Ralph Wallio, an amateur radio enthusiast who emailed her, suggested a practical reason: spelled in Morse, HA HA would take longer to send.
The encoder agrees with him. HI HI is .... .. / .... .., 33 units, while HA HA is .... .- / .... .-, 37. Each A ends on a dash where I ends on a dot, and the four extra units are the price.
Hear it
- HI HI.... .. / .... ..
- HA HA.... .- / .... .-
Hi as a greeting: 1862, and only for people you know
Hi was a shout before it was a greeting. Etymonline traces it, probably, to Middle English hy, a late 15th-century call to catch someone's attention.
The first recorded use as a greeting is American, from 1862. Etymonline also quotes The New Emily Post's Etiquette, which accepts Hi as a widely used, informal greeting between people who already know one another, but never as the answer to a formal introduction.
Make “Hi” into something
Each tool opens with the phrase already filled in.
Good questions
Frequently asked questions.
What is LOL in Morse code?
LOL is .-.. --- .-.., 35 units, and anyone decoding letter by letter will read it. On the air it is rarely sent: operators laugh with HI or HI HI, which is shorter and the form their abbreviation lists give.
Why does hi need a clear gap in the middle?
Because hi has no dashes at all. Run together, its six dots match no letter in International Morse, and eight dots in a row is the error signal, so a listener counts four dots, a pause, then two. On a bracelet or a card, leave a visible space between the groups.
How do you say hi in Morse code out loud?
Say di-di-di-dit, di-dit: four quick sounds for H, a short pause, then two for I. The last sound of each letter is said dit, which marks where the letter ends.
Characters to know
The characters “Hi” leans on, each with a page of its own.
More phrases
Something else to say? Translate any text or see all Morse code phrases and words.
Sources
- ITURecommendation ITU-R M.1677-1: International Morse codeThe standard
- IARUEthics and Operating Procedures for the Radio Amateur (John Devoldere ON4UN and Mark Demeuleneere ON4WW)PDF
- William G. Pierpont N0HFFThe Art & Skill of Radio-Telegraphy, chapter 27: Abbreviations
- BrewminateLauren B. Collister, LOL in the Age of the Telegraph (from The Conversation)
- Etymonlinehi
Last checked October 2026