Skip to main content

Greetings and celebrations93 units

Good night in Morse code

Good night in Morse code is --. --- --- -.. / -. .. --. .... -, two words with a word gap after GOOD. Written as one word, goodnight loses that gap and becomes --. --- --- -.. -. .. --. .... -, 89 units. Radio operators shorten the phrase to GN, --. -., and closing a station down for the night has signals of its own, as did the telegraph offices before them.

GOOD
NIGHT

Hear it at your speed (WPM)

Speed

At 18 WPM it takes 6.2 seconds (93 units).

Letter by letter

Every letter of the phrase, with its code and how it sounds. Tap a letter to learn it.

30: the telegraphers' good night

Before radio, landline telegraphers had a number for the end of the day. Writing in The Christian Science Monitor in 1999, John Gould recalled that 30 was "the telegraph signal that the day was over and it was time to sign off", and that "just before 30, every operator anywhere in the country was expected to offer a witticism, a pithy remark".

He knew the custom through Al Kirkwood, night operator at the local railroad station.

Gould repeats the story that 30 began as the word count at the foot of the first news story sent by wire, but only as something "it is said". In the 92 Code, 30 means no more, the end, and Wikipedia's abbreviation table notes that it is not used in radiotelegraphy. Newspapers kept it: in Gould's words, "'Thirty' thus became newspaper jargon for 'end of message.'"

Hear the difference: the first card plays “Good night” at full speed, the second plays the same letters with a word-length pause after each, the way to learn it by ear.

Play at full speed

--. --- --- -.. / -. .. --. .... -

93 units · 6.2 s at 18 WPM

Play spaced out

--. / --- / --- / -.. / -. / .. / --. / .... / -

121 units · 8.1 s at 18 WPM

Which one is “Good night”?

Test your ear in three rounds. Each round plays three signals; pick the real “Good night”.

Round 1 of 3 · by sound

How it’s timed. A dot lasts one unit and a dash three. “Good night” has 11 dots and 13 dashes, 50 units of sound, plus 15 1-unit gaps inside letters, 7 3-unit gaps between letters and 1 7-unit gap between words: 93 units in all. At 18 WPM one unit lasts 67 ms, so it takes 6.2 seconds.

Letters
9
Words
2
Dots and dashes
11 · 13
Length
93 units
At 18 WPM
6.2 s
Collection
Greetings and celebrations

How to send “Good night”

The rhythm is the same whatever you send it with: short for a dot, three times as long for a dash, a short pause between letters and a longer one between words.

  • By sound

    Hum it, whistle it or press a buzzer: short for a dot, about three times as long for a dash, with a short pause between letters. Turn on Repeat in the player above to hear it on a loop, or make it your phone's alert with the Ringtone maker.

  • By light

    Flash a flashlight, a phone light or a lamp. A clear difference between short and long matters more than speed: at 7 WPM a short flash lasts 0.17 s and a long one 0.51 s. Turn on Light in the player, or open the Flashlight signaler with “Good night” loaded.

  • Tap or knock it

    A tap can't be held, so use spacing: quick taps for dots, slower taps for dashes. Knocking on a wall is usually tap code instead, where each letter is its row and then its column on a 5 by 5 grid. In tap code, “Good night” is 2,2 3,4 3,4 1,4 / 3,3 2,4 2,2 2,3 4,4, and the Tap code translator knocks it out for you.

  • Blink it

    Quick blinks for dots, eyes held shut a little longer for dashes, and a pause between letters. “Good night” takes 24 blinks in all, so it works best face to face with someone who knows it is coming.

  • Feel it

    Squeeze a hand, short and long, so only the two of you know. On a phone, Vibrate in the player buzzes it on Android and taps it on an iPhone with iOS 18 or later, and the Vibration pattern tool lets you change the speed or copy the pattern for an app or a watch.

To tap it on a screen and see each letter as you key it: Morse keyboard

“Good night” next to similar phrases

How “Good night” compares with phrases people send alongside it, each played at 18 WPM.

PhraseIn MorseLength
Good night--. --- --- -.. / -. .. --. .... -93 units, 6.2 s
Good morning--. --- --- -.. / -- --- .-. -. .. -. --.119 units, 7.9 s
Goodbye--. --- --- -.. -... -.-- .79 units, 5.3 s
73--... ...--29 units, 1.9 s
Hello.... . .-.. .-.. ---49 units, 3.3 s

Signing off for the night on the air

Amateur operators write good night as GN, an entry in both the IARU guide's abbreviation list and William Pierpont's. Shutting the station takes two more signals. SK ends the contact, and CL, closing down, is the final code before the station goes quiet, so a last over can finish W1ZZZ DE G3ZZZ SK CL, with CL as the very last word.

The guide also corrects a habit it often hears: AR SK is redundant, because the end of the contact is plainly the end of the transmission.

Goodnight or good night: one gap apart

The two spellings send the same nine letters. What changes is the pause after the D.

As two words it is a seven-unit word gap; as one word it is an ordinary three-unit letter gap. Someone decoding a bracelet or a card relies on that wider pause to see where good ends, so keep it visible if you want the two-word reading.

Make “Good night” into something

Each tool opens with the phrase already filled in.

Good questions

Frequently asked questions.

Do operators send GN or 73 at night?

Often both. GN, --. -., is the good night and 73, --... ...--, the best regards, so a late closing can read GN ES 73 before SK, with ES for and.

How do you say sweet dreams in Morse code?

Sweet dreams is ... .-- . . - / -.. .-. . .- -- ..., 85 units. The two E's in sweet sit side by side, so leave a clear letter gap between them or they read as I.

Can you tap good night through a wall?

Yes, but knocks can't be held, so a knock can't make a dash. Either agree that a longer pause after a knock means a dash, or use the tap code, where each letter is a row and a column on a 5 by 5 grid: GN is 2-2, 3-3. The tap code translator knocks it out for you.

An outside opinion

Ask your favorite AI
about Translate Morse Code.

Already have an AI you turn to? Let it help you decide if this is the right Morse code tool for you.

Opens your chosen AI. Sign-in and prompt support vary; you can copy the question below.

What are we asking?
The question

I'm thinking about using Translate Morse Code (https://translatemorsecode.com/) to translate and learn Morse code. What does it do well, what are its limits, and is it a good fit for me? Please look at the site itself before answering.

AI can get details wrong. The quickest check is the translator itself: it is free and needs no sign-up.