Skip to main content

Greetings and celebrations79 units

Goodbye in Morse code

Goodbye in Morse code is --. --- --- -.. -... -.-- ., written as one word. The spelling matters more than it looks: good bye as two words adds a word gap, and the hyphenated good-bye adds a whole extra character. On the air, operators shrink the farewell to GB, --. -..., the first letters of good and bye.

GOODBYE

Hear it at your speed (WPM)

Speed

At 18 WPM it takes 5.3 seconds (79 units).

Letter by letter

Every letter of the phrase, with its code and how it sounds. Tap a letter to learn it.

From God be with ye

Goodbye began as a blessing. God be with ye, recorded from the late 14th century, had been squeezed into godbwye by the 1570s, and 16th-century writers spelled it God be wy you, God b'uy and God buy, among other ways.

God gave way to good under the influence of greetings such as good day and good evening. Etymonline dates good-bye as a parting word to the 1590s, while Merriam-Webster puts the first known use of goodbye at 1575.

Hear the difference: the first card plays “Goodbye” at full speed, the second plays the same letters with a word-length pause after each, the way to learn it by ear.

Play at full speed

--. --- --- -.. -... -.-- .

79 units · 5.3 s at 18 WPM

Play spaced out

--. / --- / --- / -.. / -... / -.-- / .

103 units · 6.9 s at 18 WPM

Which one is “Goodbye”?

Test your ear in three rounds. Each round plays three signals; pick the real “Goodbye”.

Round 1 of 3 · by sound

How it’s timed. A dot lasts one unit and a dash three. “Goodbye” has 8 dots and 13 dashes, 47 units of sound, plus 14 1-unit gaps inside letters and 6 3-unit gaps between letters: 79 units in all. At 18 WPM one unit lasts 67 ms, so it takes 5.3 seconds.

Letters
7
Words
1
Dots and dashes
8 · 13
Length
79 units
At 18 WPM
5.3 s
Collection
Greetings and celebrations

How to send “Goodbye”

The rhythm is the same whatever you send it with: short for a dot, three times as long for a dash, a short pause between letters and a longer one between words.

  • By sound

    Hum it, whistle it or press a buzzer: short for a dot, about three times as long for a dash, with a short pause between letters. Turn on Repeat in the player above to hear it on a loop, or make it your phone's alert with the Ringtone maker.

  • By light

    Flash a flashlight, a phone light or a lamp. A clear difference between short and long matters more than speed: at 7 WPM a short flash lasts 0.17 s and a long one 0.51 s. Turn on Light in the player, or open the Flashlight signaler with “Goodbye” loaded.

  • Tap or knock it

    A tap can't be held, so use spacing: quick taps for dots, slower taps for dashes. Knocking on a wall is usually tap code instead, where each letter is its row and then its column on a 5 by 5 grid. In tap code, “Goodbye” is 2,2 3,4 3,4 1,4 1,2 5,4 1,5, and the Tap code translator knocks it out for you.

  • Blink it

    Quick blinks for dots, eyes held shut a little longer for dashes, and a pause between letters. “Goodbye” takes 21 blinks in all, so it works best face to face with someone who knows it is coming.

  • Feel it

    Squeeze a hand, short and long, so only the two of you know. On a phone, Vibrate in the player buzzes it on Android and taps it on an iPhone with iOS 18 or later, and the Vibration pattern tool lets you change the speed or copy the pattern for an app or a watch.

To tap it on a screen and see each letter as you key it: Morse keyboard

“Goodbye” next to similar phrases

How “Goodbye” compares with phrases people send alongside it, each played at 18 WPM.

PhraseIn MorseLength
Goodbye--. --- --- -.. -... -.-- .79 units, 5.3 s
Hello.... . .-.. .-.. ---49 units, 3.3 s
73--... ...--29 units, 1.9 s
Good morning--. --- --- -.. / -- --- .-. -. .. -. --.119 units, 7.9 s
Hi.... ..13 units, 0.9 s

One word, two, or hyphenated

Merriam-Webster lists goodbye with the variants good-bye, goodby and good-by, so none of them is wrong on paper. In code they differ:

  • Good bye:

    two words, --. --- --- -.. / -... -.-- ., 83 units, because a word gap replaces the letter gap after D.

  • Good-bye:

    --. --- --- -.. -....- -... -.-- ., 97 units; the hyphen is a character in its own right, a dah, four dits and a dah.

  • Goodby and good-by:

    these simply lose the final dot of E.

For a bracelet or a message that must match a card or a quotation, copy the spelling exactly as written there; the hyphen page shows that mark by itself.

Hear it

  • GOOD BYE
    --. --- --- -.. / -... -.-- .
  • GOOD-BYE
    --. --- --- -.. -....- -... -.-- .

GB, CUL and BCNU: goodbye in operator shorthand

The CW abbreviation list kept by Dan Flanagan, W3DF, gives three ways to say it:

  • GB:

    good bye, --. -... at 21 units.

  • CUL:

    see you later, -.-. ..- .-.. at 33.

  • BCNU:

    be seeing you, -... -.-. -. ..- at 41.

CUL and BCNU work by sound, with C standing for see and U for you. For a farewell at night the same list gives GN, good night, which can also mean gone, and best regards has a number of its own, 73.

Hear it

  • GB
    --. -...
  • CUL
    -.-. ..- .-..
  • BCNU
    -... -.-. -. ..-

Make “Goodbye” into something

Each tool opens with the phrase already filled in.

Good questions

Frequently asked questions.

How do you say bye in Morse code?

Bye is -... -.-- ., 29 units, the last three letters of goodbye on their own. It reads the same to anyone decoding, though on the air operators would send GB or 73 instead.

What does SK mean at the end of a contact?

SK marks the end of the contact. It is sent as one character, ...-.-, with no gap between the S and the K, usually as the very last signal after 73. A goodbye message on a card doesn't need it; on the air it is what tells the other station you are done.

How do you say see you again in Morse code?

Operators send CUAGN, -.-. ..- .- --. -., for see you again, read by sound like CUL: C for see, U for you, AGN for again. It often comes just before 73 in a closing over.

An outside opinion

Ask your favorite AI
about Translate Morse Code.

Already have an AI you turn to? Let it help you decide if this is the right Morse code tool for you.

Opens your chosen AI. Sign-in and prompt support vary; you can copy the question below.

What are we asking?
The question

I'm thinking about using Translate Morse Code (https://translatemorsecode.com/) to translate and learn Morse code. What does it do well, what are its limits, and is it a good fit for me? Please look at the site itself before answering.

AI can get details wrong. The quickest check is the translator itself: it is free and needs no sign-up.